This is where I will post my tutorials and any tags made for me using my tutorials.
 
HomeCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 Cowgirl Up!

View previous topic View next topic Go down 
AuthorMessage
Admin
Admin


Posts : 92
Join date : 2011-12-06

PostSubject: Cowgirl Up!   Sat Apr 06, 2013 4:02 am




Cowgirl Up!

Supplies Needed:

Cowgirl Scrap by Bibi's Collection! Scraps

Limited edition Tube by Joel Adams (no longer available)
Never fret though cause there's plenty of Joel's other tubes for sale  at Creative Designs Outlet!

Font(s)-

AKA Posse

Sancreek

Westerner

Jesse James

Wild West

Plugins-

Eye Candy 4000- Gradient Glow

Mura's Meister- Copies

DSB Flux- Spider Web

OK Let's get started


Open a 600 x 250 blank canvas then open bibicowgirl papers (6) THEn copy and paste as a new layer. Now resize by 60% then go to image/rotate/free rotate by 90 degrees to the right. Now reposition so you only have the darker part showing. Next open bibicowgirl papers (3) then copy and paste as a new layer. Now change the blend mode to hard light.

Open your tube and select the largest close-up then copy and paste as a new layer. Now position so the bottom of the eyes are at the bottom of your tag.

OK now open bibicowgirl elem (79) then copy and paste as a new layer. Resize by 80% and move to that the end that looks like an 8 is in the bottom left corner. Open your tube again then use the middle sized tube then copy and paste as a new layer and position to your liking. Lower the opacity to 30.

Now open bibicowgirl elem (1) then copy and paste as a new layer. Resize by 60% then move to the top right corner. Next open bibicowgirl elem (38) then copy and paste as a new layer. Resize by 20% then go to effects/plugins/mura's meister/copies with the settings below. Now resize by 70% and move to the top left then duplicate and move the duplicate to the bottom right corner.



Now open up your tube again then select the smallest sized tube then copy and paste as a new layer. Now resize by 60% and position on the right side of your tag. Now find the rope layer and cut off any that goes past your tube to the right.

Now add a new raster layer then go to selections/select all then back to selections/modify/select selection borders with inside checked and width of 6. Now select a color from your tag. I used a darker green color from the eyes of my tube then flood fill the selection with this color.

Now add another new raster layer then go to selections/select all then back to selections/modify/select selection borders with inside checked and width of 3. Now select a color from your tag. I used a ligher green color from the eyes of my tube then flood fill the selection with this color.

OK now go to effects/plugins/dsb flux/spider web with these settings: rays- 5, rings- 4, and merge 50 then hit ok. Now select the other border layer and repeat the plugin on this layer.

OK now add your credit layer and apply a slight gradient glow to make it stand out. Next select a western type font ( I supplied the links to 5) I am using AKA Posse then type out Cowgirl Up! Now apply a slight gradient glow then position to your liking. Next add your name using a font of choice and again apply a slight gradient glow.

OK Now save and we are finished with the banner!

Alright now let's do the AV for our set.

Open a 175 x 250 blank canvas then using the items from the banner click on raster layer 2 then copy and paste as a new layer. Now move so that the darker portion of the paper is visible. Next click on raster 3 layer then copy and paste as a new layer. Now click on your star layer then copy and paste as a new layer. Now position at the bottom of the AV and then duplicate. Now go to image/flip.

Next click on the middle sized tube then copy and paste as a new layer. Position to your liking on your AV. Then click on the moon layer then copy and paste as a new layer. Now move to the top right corner of the AV. Alright now select the smaller sized tube then copy and paste as a new layer. Now resize if needed and position to your liking.

Now add a new raster layer then go to selections/select all then back to selections/modify/select selection borders with inside checked and width of 6. Now select a color from your tag. I used a darker green color from the eyes of my tube then flood fill the selection with this color.

Now add another new raster layer then go to selections/select all then back to selections/modify/select selection borders with inside checked and width of 3. Now select a color from your tag. I used a lighter green color from the eyes of my tube then flood fill the selection with this color.

Now add your credit layer remember to add a slight gradient glow to make it stand out. Next add your name or itital then apply your gradient glow

Save and we are done.

Thank You for trying my tutorial! I hope you found it easy to follow!
Back to top Go down
View user profile http://charmedcowgirltuts.forumotion.com
 
Cowgirl Up!
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Charmed Cowgirl Tutorials and Show-Offs :: Forum Sets :: Non-Animated Forum Sets-
Jump to: